Raytac's Impact on the Zephyr Ecosystem - Little Module, Huge Potential

 

In this article, Stanley Huang, MSc, Deputy Manager of Firmware Development at Raytac, shares insights on how Raytac’s modules and development kits strengthen the Zephyr ecosystem.

[Stanley Huang, New Taipei City]

When we talk about open-source platforms like Zephyr RTOS, most people immediately think of major chip manufacturers such as ST Micro, NXP, or Nordic. But to me, what truly makes Zephyr famous amongst the developer community is through modules that developers can actually touch: those they can instantly plug in and start using right away. In these terms, Raytac is one of the most underrated and important contributors in this ecosystem.

Raytac Modules Make Zephyr More Accessible

Instead of being a chip vendor, we specialize in producing high-quality, globally certified modules - especially Bluetooth and Wi-Fi modules based on Nordic chipsets, such as the AN7002Q, AN54LQ, AN54LV, MDBT53, MDBT50Q, and MDBT42Q.
All these modules are already certified with Regional RF compliances(FCC, IC, CE, KC, etc.) and the latest Bluetooth Specifications, offering developers the assurance of “plug and play” and “production-ready” solutions.
We assure that our modules have become one of the easiest platforms for Zephyr developers to test BLE functionality.

I paired Zephyr with Raytac’s MDBT50Q-DB-40 development board when I first applied Zephyr in a BLE Peripheral project . With a simple west build -b nrf52840dk_nrf52840 followed by flashing the firmware using J-Link or nRF Connect for Desktop, the BLE beacon immediately showed up on my phone. Clean, simple, noise-free, and developer-friendly - that's Raytac's style.

Modules play an invaluable role in product development

Many would say Raytac only makes modules and the real core is still Nordic’s SoC.
But I believe that in an open-source system like Zephyr, the hardware that helps your project runs first is that which contributes the most.
Our Zephyr-registered development kits eliminate the hassles of manual soldering, regulatory certification, and antenna design, allowing engineers to fully focus on developing applications based on Zephyr.
They can run Zephyr’s BLE peripheral, central, GATT, and HCI samples directly on the Raytac kits that act as a one-stop hardware solution.
In many ways, Raytac has pushed Zephyr’s usability a significant step forward.

Raytac Also Expands Zephyr’s Application Horizon

Many of Raytac’s modules are ultra-compact- ideal for wearables, smart sensors, and low-power beacons…etc. These are the scenarios where Zephyr excels, and Raytac’s modules provide the physical platform to enable companies to build their "dream devices".
When running Zephyr on a tiny module like the AN54LV-15, developers will be amazed that something smaller than a piece of corn kernel can run a full RTOS, manage the BLE stack, trigger timers, drive I2C sensors, and even connect to the cloud, all by itself.  This combination doesn’t just make development easier - it inspires developers to realize that: “they can build their projects using Raytac's hardware.”

Raytac may not be the star, but we're always ready for you

On Zephyr’s main stage, companies like Nordic, STM, and Intel take the spotlight, but Raytac plays an essential supporting role - supporting the performance from behind the scenes. We offer stable, high quality, and low-power platforms, giving every line of Zephyr code a place to run and every feature a cornerstone.
Our greatest value lies in helping developers skip antenna design and RF interference concerns - so they can jump right into the Zephyr ecosystem with ease.

Our products deliver the reliability you need and the efficiency you expect.

We invite you to explore more about how Raytac supports the Zephyr ecosystem and discover our range of development kits and modules designed for seamless integration.
Visit our Zephyr page here: https://docs.zephyrproject.org/latest/boards/raytac/index.html
Visit Zephyr's Ecosystem Vendors page: https://www.zephyrproject.org/ecosystem-vendor-offerings/

For more information, please contact:
Raytac Contact Form: https://www.raytac.com/contact/
Raytac Sales email: sales@raytac.com
abietec Service email: service@abietec.com

Nordic’s nRF54L15/L10/L05 BLE Modules from Raytac now in Mass Production

Raytac AN54LQ series Modules: Guiding Your Project at Every Turn, While Saving Power at Every Step

[28/07/2025, New Taipei, Taiwan]
We are proud to officially announce Mass Production (MP) for Raytac’s next-gen Nordic-based Bluetooth LE modules:

• AN54LQ-X15 Series (nRF54L15, green PCB): Product link
• AN54LQ-X10 Series (nRF54L10, yellow PCB): Product details
• AN54LQ-X05 Series (nRF54L05, red PCB): Product page

Just like traffic lights that direct every journey safely and efficiently, Raytac’s nRF54L series modules guide your wireless development—keeping you on the right path with cutting-edge performance and exceptional power savings.

 Each light signals a different member of the nRF54L15 / nRF54L10 / nRF54L05 module family—showcasing a clear path for your Bluetooth Low Energy (LE) applications, no matter which industry you’re from and where you’re headed.

These modules are now available for your design-in, offering:
 Powerful performance
 Ultra-low power consumption
 Compact footprints
 Full Global certifications: FCC/IC/CE/UKCA/Telec/KC/NCC/SRRC/RCM/WPC
 BT 6.0 certified
 Full Nordic nRF54 Series compatibility
 Pin-to-pin compatible amongst AN54LQ series

Whether you’re building for consumer IoT, industrial sensors, healthcare, or wearables—Raytac’s modules deliver the reliability you need and the efficiency you expect.

For more information, please contact:
Raytac Contact Form: https://www.raytac.com/contact/
Raytac Sales email: sales@raytac.com
abietec Service email: service@abietec.com

---

Edited by Business Development Manager: Tony Yin


Raytac Corporation 勁達國際電子股份有限公司 / Raytac Corporation (USA) / abietec Inc.
A Bluetooth, Wi-Fi, and LoRa Module Maker/ODM & OEM Manufacturer based on
Nordic nRF54; nRF53: nRF52; nRF51; nRF7002
Semtech Specification: SX1262

Bluetooth Specification: BT6 ; BT5.4 ; BT5.3 ; BT5.2.
Wi-Fi Specification: Wi-Fi 6
LoRa Specification: LoRaWAN

All products are FCC/IC/CE/Telec/KC/RCM/SRRC/NCC/WPC/RoHS/Reach Pre-Certified.
http://www.raytac.com
https://www.raytac.com/contact/
email: sales@raytac.com
Tel: +886-2-3234-0208(TW)/+1-626-217-3139(USA)

Raytac's nRF7002 module: AN7002Q series Wi-Fi module have obtained Wi-Fi Alliance CID

 [2025.02.19]

Raytac Corporation is proud to announce that our application for Wi-Fi Alliance (WFA) certification on the AN7002Q series(based on Nordic's nRF7002 IC) has been successfully approved. This achievement reinforces our commitment to providing high-quality, reliable, and standard-compliant wireless solutions.
By leveraging this certification, our modules ensure seamless interoperability, enhanced security, and superior performance for a wide range of IoT applications.

Advantages of Using Raytac Modules with WFA Certification:

Reliable and Secure Connectivity – Ensures seamless communication with other Wi-Fi-certified devices while meeting industry-leading security standards for stable and secure data transmission.
Faster Time-to-Market – Pre-certified modules simplify compliance processes, reducing development time.
Global Market Access – Certification helps meet regulatory requirements in multiple regions, expanding business opportunities.
Significant Cost-Saving – Compared to the chip-on-board approach, using Raytac’s Wi-Fi module allows direct access to the Derivative programs(please click here for more descriptions), leveraging Raytac’s CID to minimize certification costs and save time-to-market.

To learn more about Wi-Fi certifications and Wi-Fi + BLE applications, feel free to contact us anytime at service@raytac.com.

---

Edited by Account Manager: Ms. Mandy Chao

Raytac Corporation 勁達國際電子股份有限公司
A Bluetooth, Wi-Fi, and LoRa Module Maker based on
Nordic nRF54; nRF53: nRF52; nRF51; nRF7002
Semtech Specification: SX1262

Bluetooth Specification: BT6 ; BT5.4 ; BT5.3 ; BT5.2.
Wi-Fi Specification: Wi-Fi 6
LoRa Specification: LoRaWAN

All products are FCC/IC/CE/Telec/KC/RCM/SRRC/NCC/WPC Pre-Certified.
http://www.raytac.com
email: sales@raytac.com

Wi-Fi Alliance (WFA) – Certification program --Flex Track & Derivative

 Wi-Fi Alliance (WFA) – Certification program --Flex Track & Derivative

(The least effort option for Wi-Fi certification)

Source: https://www.wi-fi.org/certification

After reading through the article of WFA (Wi-Fi Alliance) QuickTrack program, you may try to seek for a seamless option that least effort made for a Wi-Fi certificate.

Raytac Corp. has took this into consideration already!

Raytac Corp. is working on the FlexTrack package as a source product so that end product developer can apply a Derivative program to grant a WFA certificate by leveraging Raytac Corp. WFA source product – NRF5340 & NRF7002 IC combo solution (MDBT53 & AN7002 Module)

Let Raytac Corp. do the work ahead of your request, the FlexTrack program is provided with a fix option, the necessary Wi-Fi compliance & conformance have been done by Raytac Corporation, Raytac Corp. will get a WFA Certificate that you (end product developer) can simply leverage it and apply Derivative program seamlessly for getting your own Wi-Fi certificate ID as long as you’re the member of Wi-Fi alliance.

• What benefits you (end product developer) by sticking to Raytac Corp. FlexTrack (Source product) program?

Source Product: NRF5340 & NRF7002 IC combo solution (MDBT53 & AN7002 Module)

1. No-Testing required: Raytac Corp. has granted the Wi-Fi certificate ID using source product (MDBT53 & AN7002 Module) , you simply leverage Raytac Corp. Wi-Fi certified ID and apply the solution to your end product when you’re working on the certification process ; No-testing is required.
   
   
2. Faster time-to-market end device (Wi-Fi) : By using Raytac Corp. available WFA source product , you can get through the certification process easily without being in the process of a series of tests as long as you’re the member of Wi-Fi alliance. This helps your Wi-Fi end device get launched at the earliest.
   
   
3. Seamless Connectivity & Least resource required : Without involving in a series of complicate Wi-Fi compliance and conformance test, it delivers the seamless connectivity and the least effort would be took for end product developer to get Wi-Fi certificate ID.
   
   
4. Waive cost on Wi-Fi conformance test: it significantly decreases the cost for your project budget without getting through a series Wi-Fi compliance & conformance test.

If you stick to Raytac Corp. combo solution (source product )- MDBT53 & AN7002 Module, given the Wi-Fi components are pre-certified in the FlexTrack solution, you (end product developer) will be able to use the minimal resource and least effort to get Wi-Fi certificate ID for your Wi-Fi end device.

• Which membership level shall be applied in Wi-Fi alliance for being Derivative?
  
  

If you agree with Raytac Corp. FlexTrack program and are confident in the Raytac Corp. combo solution(source product )- MDBT53 & AN7002 Module , Wi-Fi Implementer membership would extend this benefit for you. Being the Implementer membership and participate in the Derivative program, this is the perfect option for the budget sensitive company.

Source: https://www.wi-fi.org/membership

https://www.wi-fi.org/membership/membership-benefits

 

Raytac Corp. is about to launch Wi-Fi module AN7002 in 2024 ;

Keep your attention to the blog post recently.

 

Edited by Sales Manager: Jocelyn Tsai

Raytac Corporation 勁達國際電子股份有限公司
Bluetooth & WiFi module maker based on Nordic nRF54, nRF53, nRF52, nRF7002 solution
BT5.4 &BT5.3 & BT5.2 & BT5.1 Qualified, FCC/IC/CE/Telec/KC/RCM/SRRC/NCC Pre-Certified. Bluetooth Solution: nRF54, nRF5340, nRF52840, nRF52833, nRF52832, nRF52820, nRF52811, nRF52810, nRF52805, nRF51822 WiFi Solution: nRF7002
www.raytac.com
email:service@raytac.com
Tel: +886.2.3234.0208

Wi-Fi Alliance (WFA) – Certification program --QuickTrack

 Wi-Fi Alliance (WFA) – Certification program --QuickTrack

 -Collaboration between Solution provider & End product developer

Source: https://www.wi-fi.org/certification

 

Raytac Corp. is officially a member of Wi-Fi Alliance now!

Before stepping into Wi-Fi module selection and adoption, Wi-Fi regulatory compliance will be essential for you to know.

 

Let's dig into the Wi-Fi certification program and investigate the possibility of WFA Qualified Solution (provided by Solution Provider) & WFA certificate (obtained by end product developer).

• What benefits you (end product developer) by working with Rayta Corp. (Solution Provider) for QuickTrack program?

1. Faster time-to-market : By using available WFA Qualified Solution (provided by solution provider) to waive (or partially waive) compliance test criteria/decrease testing days for end product (Wi-Fi Device), shorter development days would be took before product launch.
   
2. Reduce test and certification costs: it significantly reduces the cost and certification days for your project with minimal resource by working with Raytac Corp. (Solution Provider) using available WFA Qualified Solution.
   
3. Avoid testing redundancies: Raytac Corp. (Solution Provider) has pre-certified the core Wi-Fi architecture and protocols in Wi-Fi module AN7002Q, the necessary qualification tests has been conducted. You (end product developer) don’t need to test on those same criteria for end product (Wi-Fi Device) if Raytac Wi-Fi module is implemented in your end device.
   
4. Allow flexibility of Wi-Fi functionality change: In case those minor change of Wi-Fi feature which is not relates to core/essential/architecture change may be raised someday in the future , QuickTrack program delivers the qualified product base (Source product) and lower cost with conformance test (QuickTrackTool) responding to the minor change. 

• How QuickTrack certification program works?

QuickTrack certification program shall be completed by 2 different parties, one is solution provider and the other is end product developer.

(Refer to the following image)

As a Solution Provider, Raytac would proceed the essential and fundamental Wi-Fi protocol/compliance test and develop this into a Qualified solution so that end product developer can leverage this solution as a base (Source Product) to obtain a certificate entitled to end product developer.

Please note the conformance check (named QuickTrack Tool) would be required before Wi-Fi alliance certifies the application.

Conformance check (QuickTrack Tool) will be reviewed for the 8 Wi-Fi components.

1. Chipset
2. Wi-Fi Component Firmware Version
3. Driver
4. RF Architecture
5. Wi-Fi Component Operation System
6. Physical Interface
7. RF Components
8. Antenna

When you adopt Raytac WFA Qualified solution, the core/essential/architecture components are pre-certified in the solution, in most of cases, no further conformance test is required, you (end product developer) will be granted to obtain the certificate after a couple of days applying process.

Raytac leaves the right to Wi-Fi alliance for the conformance review (run QuickTrackTool).

• Which membership level shall be applied in Wi-Fi alliance for being QuickTrack?

If you agree with QuickTrack program and are willing to participate in the partnership as end product developer with Raytac Corp. (solution provider), Implementer membership will be cost effective option for you.

Company like Raytac Corp. served as solution provider or require professional Wi-Fi alliance support, company own/multiple programs oriented or needs tasks management shall refer to the membership of top one - Contributor.

Source: https://www.wi-fi.org/membership

https://www.wi-fi.org/membership/membership-benefits

 

Raytac Corp. is about to launch Wi-Fi module AN7002Q in 2024 ;

Keep your attention to the blog post recently.

 

Edited by Sales Manager: Jocelyn Tsai

Raytac Corporation 勁達國際電子股份有限公司
Bluetooth & WiFi module maker based on Nordic nRF54, nRF53, nRF52, nRF7002 solution
BT5.4 &BT5.3 & BT5.2 & BT5.1 Qualified, FCC/IC/CE/Telec/KC/RCM/SRRC/NCC Pre-Certified. Bluetooth Solution: nRF54, nRF5340, nRF52840, nRF52833, nRF52832, nRF52820, nRF52811, nRF52810, nRF52805, nRF51822 WiFi Solution: nRF7002
www.raytac.com
email:service@raytac.com
Tel: +886.2.3234.0208

Navigating RF Certification: A Guide to DTM and Radio Testing

 RF Test – DTM & Radio Test

When launching new products, there is a requirement for RF testing, and two methods are commonly used:

DTM (Direct Test Mode) and Radio Test.

Nordic's SDK provides two RF testing programs: DTM (Direct Test Mode) and Radio Test. While both methods can test RF indicators, they have some distinctions. DTM follows the Bluetooth specification's Direct Test Mode data format (referenced in Bluetooth Core Specification Version 5.2, Vol. 6, Part F.), primarily for Bluetooth certification tests.

On the other hand, Radio Test focuses on the chip's radio indicators, making it more suitable for FCC and ETSI certifications.

Let's delve into detailed explanations for DTM and Radio Test programs.

DTM(Direct Test Mode)

The Bluetooth Association offers a feature for testing RF characteristics. Nordic has incorporated DTM firmware into the SDK according to SIG standard documents. Customers only need to modify the Baud Rate and UART TX/RX pins to conduct RF tests.

1. Download and install nRF Connect for desktop software and nRF5 SDK from the Nordic website.

nRF Connect for desktop download:

https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-desktop/Download

nRF5 SDK download:

https://www.nordicsemi.com/Software-and-tools/Software/nRF5-SDK/Download#infotabs

2. Install the Direct Test Mode program in the nRF Connect for desktop software.

3. Extract the SDK package, open the DTM example code from

nRF5_SDK_vxx\examples\dtm\direct_test_mode\ board number\blank, modify TX and RX pins based on the target board's definitions, then compile.

Download the program to the target board connected to the PC.
(Select the appropriate sample code based on the IC/module for testing, referring to the  board number below. )

IC P/N	board number
NRF52832	pca10040
NRF52810	pca10040e
NRF52840	pca10056
NRF52811	pca10056e
NRF52833	pca10100
NRF52820	pca10100e

RF testing is performed using UART TX/RX commands.
The SDK program defaults to certain positions, but users can modify these two pin positions according to their product design without changing the Baud Rate setting.

UART Pin	nRF51	nRF52
TXD	P0.09	P0.06
RXD	P0.11	P0.08

4. Use nRFConnect DTM for testing by adjusting UART TX/RX pins.

Please refer to Video tutorial from link below:
https://github.com/NordicSemiconductor/pc-nrfconnect-dtm/blob/master/resources/screenshot.gif

Radio Test

Nordic provides a tool for simpler RF testing, allowing the configuration of radio-related data such as TX power, frequency, TX carrier, and TX modulation carrier through a Command List. It doesn't include testing for RX sensitivity; if needed, users must either write a program for this test or use DTM for testing.

1. Open from nRF5_SDK_vxx\examples\peripheral\radio_test\board number\blank
(Based on the IC/module for testing, referring to the board number below.)

IC P/N	board number
NRF52832	pca10040
NRF52810	pca10040e
NRF52840	pca10056
NRF52811	pca10056e
NRF52833	pca10100
NRF52820	pca10100e

2. This test also utilizes a Command-based approach to send instructions for different parameter tests. Compared to DTM, Radio Test is more flexible, offering a wider range of RF parameters to test.
The connection method between the target board and PC, serial port modifications, and the approach with DTM are identical.

3. Use the command-Line interface (CLI) through the serial port to control and test the output power, bitrate, and channel settings of the radio parameters during testing.

Additionally, configure the CLI to enable the 32 MHz high-frequency crystal oscillator.

The application allows setting scanning mode with intervals ranging from 1 millisecond to 99 milliseconds (per 1 millisecond) for each channel.

4. Refer to the Nordic CLI commands documentation for the command testing method.

https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk5.v15.2.0%2Fnrf_radio_test_example.html&cp=4_0_0_4_5_29_0&anchor=nrf_radio_test_example_commands

5.Testing

Lastly, we can utilize Spectrum to test PCBA RF characteristics.

Edited by Sales Manager: Ms. Vicky Huang
Raytac Corporation 勁達國際電子有限公司
A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF53 & nRF52 solution
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF528

SRRC Certification Update - Document No. 129

 About SRRC Certification:

SRRC, or the State Radio Regulation Committee, is a mandatory certification required by the National Radio Management Committee of the Ministry of Industry and Information Technology of China. All wireless products sold within China must obtain certification, commonly referred to as SRRC certification, which involves approval of the wireless transmission equipment model.

SRRC Document No. 129:

Document No. 129 introduces various interference avoidance technical requirements for wireless transmission equipment, including "pre-transmission scanning," "monitoring and avoidance," and "Medium Utilization (MU)" for equivalent occupancy rate.

a. "Pre-transmission scanning" and "monitoring and avoidance" mechanisms involve monitoring and listening to the wireless channel before or during signal transmission. By setting appropriate detection threshold levels, the channel's occupancy status is determined to select an idle channel for access.

b. The "equivalent occupancy rate" mechanism requires wireless transmission equipment to self-adjust based on parameters such as "Duty Cycle" and "transmission power," ensuring the "equivalent occupancy rate" remains at a lower level (not exceeding 10%).

1.     Certificate Validity Period:
Enforced from October 15, 2023. During this period, both old and new policies can be applied. Certificates obtained under the old regulation (Document No. 353) are valid until December 31, 2025. However, certificates obtained by complying with the requirements of Document No. 129 will be valid for 5 years.

2.     Sample Requirements:
2.1   The quantity of conducted samples prepared according to the old regulation remains unchanged: 5 samples.
2.2   The major change introduced by Document No. 129 is the addition of interference avoidance technical requirements. The interference avoidance test items include:
1.     Maximum channel occupancy time
2.     Minimum channel idle time
3.     Minimum silence period duration
4.     Detection of unused signals
5.     Detection threshold
6.     Short control signal duty cycle
7.     Equivalent occupancy rate.

Differences between Old and New Regulations:

Edited by Sales Manager: Ms. Vicky Huang
Raytac Corporation 勁達國際電子有限公司
A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF53 & nRF52 so

Understanding Wireless Certification and Compliance:A Guide to Module and Non-Module Approval Processes

 Certification and compliance:

By obtaining wireless (Bluetooth) certification, manufacturers can demonstrate that their products comply with the required technical reliability. In another words, these certifications are like products’ passes, allow them legally entering the market and be able to import or export globally. Modular approval and Non-modular approval are two different approaches to the certification and regulatory processes for wireless communication devices.

Modular approval is a process in which a wireless device is certified as a modular component, such as a Bluetooth module, that can be integrated into multiple host devices without additional testing for each host device. Once certified, the module can be used in various host devices without undergo the same level of testing.

Non-modular approval is also known as end-product approval, is the traditional certification process for wireless devices, where the entire device needs to be tested and certified for compliance with wireless (Bluetooth) standards and regulations.

Countries follow and under modular approval such as FCC (USA), IC (Canada), Telec (Japan), KC (South Korea), NCC(Taiwan), SRRC(China)…etc.Meanwhile, countries are under non-modular approval, we have CE RED (Europe), RCM (Australia and New Zealand)…etc.

The elaboration and the easy steps on how the process we go through as you choose Raytac, detail for each as following:

Modular Approval:

FCC  (USA)
FCC ID Search | Federal Communications Commission
1. Part 15C –> Simply use our module FCC ID on product label
2. Part 15B (EMC) –> request lab to test on EMC, SDoc*
*Definition: SDoc(Supplier’s Declaration of conformity)
One way to show that a product, process or service to comply with a standard or technical regulation, in which a supplier provides written assurance of conformity to the specified requirements.

IC (Canada)
IndustryCanda Wireless ID Database (industrycanada.co)
1.Similar to FCC –> Simply use our module IC ID on product label.
2.–> request lab to test finished good on EMC (IC ES003).
Recommend combining test with FCC Part 15B

Telec (MIC)(Japan)
MIC ICT Policy (soumu.go.jp)
1.–> Simply use our module Telec ID on product label
2.Different from the USA and Canada –> EMC is optional in Japan, upon on end customer’s request.

KC  (South Korea)
South Korea – Labeling/Marking Requirements (trade.gov)
1. Wireless test can be continued to use module report, new test is not required.
2. EMC KN301489(same rule as CE EN301489)
–> to be tested based on final goods under EMC test policy. Same rules as FCC and IC.
Recommend combining test with FCC Part 15B.
3. If product obtain additional cable IO port, test on KN3235 is required.
4. To be KC certified, the new test is required, certification no. cannot be continued to use from other policy. And the test must be done locally.

NCC (Taiwan)
NATIONAL COMMUNICATIONS COMMISSION (ncc.gov.tw)
1. Products is compliant with platform policyà lab submit photo and add product under Raytac NCC no.
2. Products is not compliant with platform policy à product must be tested as final goods at the lab to be certified.
*Definition: platform policy: product itself has it’s own function before Bluetooth was installed. For example, a Bluetooth installed pen has a new function; it vibrates when the switch is on. In this scenario, pen originally has it’s own function, and now the addition function; vibration has been added to this device. We say this product is compliant with platform policy.

SRRC (China)
State Radio Regulation of China (srrc.org.cn)
1. –>Simply use our module SRRC ID on product label.
2. Products doesn’t under the category of home electronics / office supplies, SRRC test must be implemented.

Non-Modular Approval:

CE RED  (Europe)
CE Marking (trade.gov)
1. Wireless test: EN300328
–> Conducted test could continue to use Raytac ‘s CE report.
–> Radiated test is required to be tested based on final goods under wireless regulation.
2. EN301489 (EMC) –> Same rules as FCC and IC. Recommend combining test with FCC Part 15B
3. Safety test: EN60950 (EN62368)–> safety test is required to be tested based on final goods under regulation.

RCM (Australia and New Zealand)
The Regulatory Compliance Mark (RCM) (General) – EESS
1. Products is CE certified –>lab can copy CE report to apply RCM
2. Products is not CE certified –> go through the same test as CE regulations.

Overall, it’s important to note that the certification process and requirements may vary across different regions. Manufacturers should consult the relevant certification authorities to determine the specific requirements for their wireless devices.
Raytac already took a step ahead gone through complex procedures of obtaining certifications, and we also have strong IT team to support for best solutions.Choosing Raytac would allow you to work more efficient and it will be your key in success for all the projects.

Edited by Sales Manager: Mandy Chao