2018年4月28日 星期六

Raytac AT-Command Module Solution Product Road Map

nRF52810 AT-Command Evaluation DK Board is a multifunction hardware design for several applications.
Not only a AT-Command Peripheral (Slave) role released recently, but also Central (Master) role deployed Nordic nRF52832 & nRF52840 Solution in the near future.

2018年4月1日 星期日

Raytac Product Change Notice (PCN) Announcement for Nordic nRF52832 Solution


Dear Customers,



Correspond to Nordic new revision of the IC with key changes 
(According to Nordic Information Notice No.: IN-105, rev.1.0)

nRF52832 SoC Build Code changed: 
1. nRF52832-QFAA from B00 to E00
2. nRF52832-CIAA from B00/B10 to E00/E10


Raytac would like to announce Product Change Notice (PCN18033101) for below Module lines which are built based on Nordic nRF52832 Solution

Modules built by nRF52832 SoC Part no. Changed from
1.        From MDBT42Q-512K to MDBT42Q-512KV2
2.        From MDBT42Q-P512K to MDBT42Q-P512KV2
3.        From MDBT42-512K to MDBT42-512KV2
4.        From MDBT42-P512K to MDBT42-P512KV2
5.        From MDBT42V-512K to MDBT42V-512KV2

6.        From MDBT42V-P512K to MDBT42V-P512KV2

Customers those who have been developing products based on above modules please contact with service@raytac.com to request V2 samples for evaluation.


Reference Download Site

Nordic PCN and IN-105, rev.1.0


Nordic Errata (nRF52832 Rev 2 Errata v1.1)







Raytac Corporation 勁達國際電子有限公司
A BT4.1 & BT 4.2 & BT 5.0 module maker based on Nordic nRF51 & nRF52 solution 
(nRF51822 & nRF51422 & nRF52832 & nRF52810 & nRF52840)
www.raytac.com          email: cs@raytac.com          Tel: +886.2.3234.0208

BLE Module Firmware Development Q&A: NFC pins creates “Error 404 – signal not found” (technically)

When you start developing your firmware for your Nordic nRF52832 solution-based Raytac BLE module, you will (like on most other projects) b...