Tuesday, September 14, 2021

Bluetooth Module UKCA Certification

"The UKCA marking came into effect on 1 January 2021. However, to allow businesses time to adjust to the new requirements, you will still be able to use the CE marking until 1 January 2023 in most cases" according to British Government's announcement. 

The UKCA (UK Conformity Assessed) marking has been an issue for brands since Brexit effected which regulate for goods, products been placed, used, sold in Great Britain (England, Wales and Scotland). It covers most goods which previously required the CE marking.

Bluetooth module provides wireless communication by using radio wave to connect over distances are requited to meet compliance with local standard. As the worldwide key Nordic solution module manufacturer, Raytac will continue to fulfill every major local government's guidance of regulation compliance such as FCC, IC, CE, MIC, ....and UKCA for sure. 


Raytac Corporation 勁達國際電子有限公司
A BT5.3 & BT5.2 & BT5.1 module maker based on Nordic nRF53 & nRF52 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208




Tuesday, August 3, 2021

Wireless Certification For Wirepas Massive On Pre-Certified Module

 Does the end products need to perform certification test again if using Wirepas Massive software on a Pre-certified Bluetooth module? The Answer is "No"!

Local wireless regulation is the obligation for all devices need to follow. Raytac recently have received several queries from customers asking about if products built by Raytac's Bluetooth modules need to perform FCC testing again if loaded Wirepas Massive software (aka Wirepas Mesh)?

Wireless regulation by countries may simply divided into 2 categories which are modular policy and non-modular policy. Countries like USA (FCC), Canada (IC), Japan (MIC/Telec)...etc. are following modular policy which means end products do not need to perform wireless testing and allow to use certified module ID on end products directly without further testing required. For non-modular policy countries like Europe (CE), the end products can only reference part of module testing report but still need perform the testing based on product base.

Bluetooth modules loaded Wirepas software would not change the wireless characteristics and features in term of frequency, channels, modulation, transmit power and antenna from original. Therefore, the original module certification and testing report can be referenced, used and leveraged.

Wirepas, an IoT software provider offers a flexible, scalable, and high reliability connectivity solution has been significantly reducing the cost and complexity over projects. The long-standing partnership between Raytac and Wirepas framed a combined hardware and software solution, has built up an ecosystem by providing a per-certified module and ready-to-use software successfully shorten time-to-market for system integrations and accelerate business.


Raytac Corporation 勁達國際電子有限公司
A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208


Thursday, July 22, 2021

Reliability Test Report-Nordic nRF52833 Module (MDBT50Q Series)

What is Reliability Test? Why it is important?

Reliability test is the measure which helps to predict future behavior during a period of usage of the product, component or material. In combination with the measurement of relevant parameters and the use of appropriate test methods, reliability test helps to ensure the function and qualify of the product or feature can perform as designated. 


Nowadays, Bluetooth module has become the most important key part within whole IoT system, It is not only controlling the connection but also computing. Raytac understood how critical the module need to perform in the system no matter commercial or industrial applications. Therefore, Raytac conduct the reliability testing plans for all series modules in order to ensure all the module‘s duration can meet design request.

The Reliability test is following JASO D001-94, Clause 5.12, and testings are under below 3 environments.

  1. Low temperature maintain test under -40℃ and last for 72hr
  2. High temperature maintain test under 105℃ and last for 72hr
  3. Thermal shock testing under -40℃~105℃

Raytac's modules have been recorded No data loss over Total 252,979,200 bytes communication during the test. The perfect result proof not only IC but also all components in the module are qualified to work for you!

The detail of the test report can be found and download from Raytac's Website Support Page.


Reliability Report-(-40℃ & 72hr)-MDBT50Q(nRF52833)





Reliability Report-(105℃ & 72hr)-MDBT50Q(nRF52833)




 Reliability Test Report-(-40℃~105℃ Thermal Shock Test)-MDBT50Q(nRF52833)



A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208




Thursday, July 8, 2021

Nordic nRF5340 Module By Raytac Corporation

       Bluetooth technology has been developing over decades, Nordic nRF5340 no doubt is the most important edge cutting wireless evolution released in 2020 since then. Throughout the common either audio or data Bluetooth transmission to advanced data & audio connection between devices, IoT applications now have already been derived from past simple purpose toward contemporary comprehensive and complex implements in either commercial or industrial fields.

      Raytac Corporation, a Taiwan based module maker, has been adopting Nordic solutions spectrum a number of modules incorporating different form factors, antenna options and feature modules. Integrating nRF5340 IC mass production has begun and Raytac is hereby is glad to announce that there are a total of 5 modules being released with 2 kinds of form factors, MDBT53 and MDBT53V.



      MDBT53 is a System-on-Module (aka SoM) with a good size of 9.3mm x 14.3mm and 48 GPIO which is an ideal dimension to fit in most applications. MDBT53 provides 3 antenna options, Chip antenna; PCB antenna; and u.FL connector for external antenna which deliver a maximum feasibility for most IoT projects.


      MDBT53V is designated for the application which has a space constraint design. A 7.8mm x 12.4mm with 25 GPIO is small enough to offer the opportunity of employing nRF5340 modules in the project. In addition, the module offers an extended working temperature of up to +105°C enabling the module to become the most reliable connectivity source for industrial applications. MDBT53V provides 2 options of antenna, Chip and PCB, for developers’ selection which is capable of optimizing the project plan in terms of performance and budgetary. 


      Over the past few years, Raytac experienced the fast changing of Bluetooth technology from BT2 all the way to latest BT5.2; from heavy power consumption to advanced Low Energy. Raytac is determined in its the mission to provide better module service in the aspects of quality, coverage, and stable pipeline to all partners. MDBT53 & MDBT53V, nRF5340 solution modules, an epochal Bluetooth technology which significantly improves the connectivity ability from data transmission toward audio broadcasting which would be the best model to provide technology that could benefit and contribute to people’s lives.


Raytac Corporation 勁達國際電子有限公司
A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208










Tuesday, June 15, 2021

ANT+ Module by Raytac

 nRF51422 is the first solution supports both Bluetooth and ANT+, different from pure Bluetooth Low Energy BLE solution, nRF51822 released earlier. The edge cutting technology enable nRF51422 suporting multiprotocol concurrency capable for both Bluetooth Low Energy and ANT+. At the same time Nordic released SDK S310 for nRF51422 which is a combined peripheral BLE and ANT+ protocol stack that supports concurrent operation and all ANT+ features.

When Nordic moved to nRF52, started from nRF52832, the game changed. Even nF52832 still supports ANT+, the technology support such as SDK releasing or developers' forums, has moved to direct supported by ANT+ Wireless (formerly Dynastream Innovations). Since then, Raytac suggest developers who is interested in ANT+ product still able to select the modules based on core specification and form factor, but access the firmware development support from ANT+ directly. Developers who are interested to know more about ANT+ is encouraged visit ANT+ FAQ support page first for more information about membership, development, resource and certification.

All Nordic nRF52 solutions supports ANT+ feature, developers may refer to below Raytac module map and find what the protocol supports by the symbol stated besides the Nordic solution indication.



Raytac Corporation 勁達國際電子有限公司
A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208


Friday, June 4, 2021

MDBT42T & MDBT42TV Joined Raytac AT Command Codeless Module Family

Headache about how to make your device going wirelessly? Want to have Bluetooth connectivity implement but worried about there is no resource to support firmware code developing ? Raytac AT command modules is the best ideal solution to enable the project having a breakthrough achievement quickly without writing a line of code or building up a design of RF hardware.


AT command stands for Attention Command, which is the most ordinary, easy and widely applied protocol to connect and bridge between IoT devices. Learning from Bluetooth Classic Serial Port Profile (aka SPP) experience, Raytac has been using UART service (ask NUS, Nordic UART service) since 2016 to assist customers proceed the Bluetooth project development. With full experience accumulated from projects, Raytac released the fist AT command module in 2018. Until now, Raytac AT command modules have been widely applying in different applications and successfully easier the project development and shorten the schedule.

Raytac keep improving to meet your demand now and future. When IoT device goes smaller become a trend of fashion, Raytac headed for it. Today, Raytac is happy to announce there are 2 new AT command modules released which are MDBT42T & MDBT42TV, which will have 2 kinds of antenna option available for each model. The modules are smaller than ever which benefit for the applications with space constraints design, also an optimized hardware module design to enable the module not only small but low cost. Raytac keep striving to make it better.

MDBT42T Series - AT Command Module & Development Kit Demo Board

MDBT42T-PAT (PCB Antenna AT Command Module)

MDBT42T-AT (Chip Antenna AT Command Module)

MDBT42T-AT-UART-S (AT Command Module DK Development Kit )

MDBT42TV Series -AT Command Module

MDBT42TV-PAT (PCB Antenna AT Command Module)

MDBT42TV-AT (Chip Antenna AT Command Module)


Raytac Corporation 勁達國際電子有限公司
A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)
www.raytac.com. email: cs@raytac.com. Tel: +886.2.3234.0208



Friday, May 28, 2021

Module Design Resource: 2D/3D/Footprint/Reflow/KeepOut Area Design Guide

 With Internet of Things (IoT) technology being the talk of the town for years, Bluetooth obviously has become the most important solutions for short and middle range device connection. 

     Raytac Corporation, a specialized module maker, adapted Nordic solution among various solution providers, developed a rage of modules with different form factors, antenna options and feature capabilities to optimize and simplify the design and development experience. By this comprehensive product line provided, project feasibility would never be the challenge for all developers.

    The pertinent support need out of projects Raytac has been experienced is the accessibility of module design reference, in term of 2D (autocad), 3D (Step / ProE), footprint, reflow, and keep out area suggestion information. To provide a convenient and free to use resource library for developers is seriously been considered. Therefore, Raytac has created a support page in the website, loaded in all the essential design guide information based on all modules. Thus, developers all over the world can just simply click the website and  obtain the immediate design information without taking time in back and forth mail communications. This does significantly save the developing schedule up to 2~3 days at least.

Raytac keep improving to make things easier. Any idea you expect from Raytac, feel free to let us know~

Raytac Website Support Page (Click me)

Raytac Corporation 勁達國際電子有限公司

A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)



Tuesday, April 27, 2021

Raytac Corporation Factory Tour

 Many Customers are interested about Raytac's facility, reliability and capacity. Here, Raytac would like to invite customers having a quick tour and know more about Raytac's factory.

Raytac's factory is located in New Taipei City where is located in north of Taiwan. The factory scales 4600 square meter with 180 man power. A completed in house SMT equipment and inspection facility provide a reliable and speedy module production line with over 600,000 pcs monthly capacity.





Raytac Corporation 勁達國際電子有限公司

A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)

www.raytac.comemail: cs@raytac.comTel: +886.2.3234.0208

Thursday, January 14, 2021

Nordic nRF52833 Module by Raytac

 nRF52833 is a powerful solution which supports multiprotocol such as Bluetooth, Zigbee, and Thread but also qualified for industrial operation at an extended temperature range of -40°C to 105°C. 

Raytac's MDBT50Q and MDBT50 module employed nRF52833 solution offering 2 kinds of form factor with either 48 or 18 GPIO option for selection. 3 antenna options helps developers to find the best balance between performance and budgetary for projects.

MDBT50Q and MDBT50 modules are BT5.2 qualified supports direction finding and Bluetooth long range feature.  Both are built around 128K RAM, 512K Flash memory with I2C, SPI, I2S, UART, NFC, USB interface. A 1.7V to 5.5V supply voltage range enables powering the device from rechargeable batteries or over USB and +8dBm output power has significantly enhance the bluetooth long range coverage which is suitable for outdoor or smart home applications.

The modules are FCC/IC/CE/Telec/KC/SRRC/NCC/RCM pre-certified and in mass production for volume shipment. EVK demo board is also available for quick debug and evaluation. Developers who are interested in nRF52833 module MDBT50Q and MDBT50 are welcome get in touch with Raytac for immediate service support.






Raytac Corporation 勁達國際電子有限公司

A BT5.2 & BT5.1 & BT5 module maker based on Nordic nRF52 & nRF51 solution 
(nRF5340 & nRF52840 & nRF52833 & nRF52832 & nRF52820 & nRF52811 & nRF52810 & nRF52805 & nRF51822)

www.raytac.comemail: cs@raytac.comTel: +886.2.3234.0208